Additional Images

Side Roll Tarp for Belly Bottom Dump Trailer Bed - Black 7.5oz Seamless Closed Mesh

RT7.5
  • Constructed using 7.5oz Closed Mesh
  • Webbing reinforced hem
  • 4" pocket on drivers side
  • 2" pocket on passenger side
  • 18" strips of webbing reinforce the pocket
Availability: Made to Order - Ships in 5 business days
Pricing: $0.00

Customize Your Item

 * required
 * required
- Total Square Feet -
 * required
- -
 * required
- -
 * required
- -
 * required
Qty:
Free Ground Shipping Lower 48 States

Description

Roll tarp systems are commonly used on open top trailers with either a belly dump, end dump, or walking floor feature. They can also be found on roll off containers, grain wagon carts, fertilizer spreaders, and tender boxes. Side roll tarps can be manual or electric and use a pair of pipes to secure the tarp as well as open it from side to side. Most roll systems include a metal front nose cap for the tarp to overlap and belly dump trailers typically have one in the rear as well.

Tarp width is the side to side measurement and is a calculation of trailer width, plus any extra arch added by bows, plus many roll systems require a foot of travel to lock in place. 9.5', 10', and 10.5' are the most popular widths. Tarp length is the end to end measurement. Metal front caps typically have a raised tab to indicate where the tarp should start. Measure from this point to this same tab at the rear of the trailer to learn the length needed. In the event your trailer does not have these tabs plan for at least 6" of overlap at each end.

This replacement roll tarp is built using our 7.5-ounce polypropylene closed mesh fabric. The material has a tight weave that is 95% solid which is perfect for containing fine particles like sand or saw dust. Unlike our other fabric options this material comes on a 144" roll that allows for seamless construction up to 11.166' wide. This is our go to fabric for asphalt due to its 320-degree temp rating and a slick calendered finish that prevents asphalt from building up on the tarp. The slick finish and seamless construction also help to prevent snagging which is ideal for fleets hauling solid waste to a landfill.

Our standard roll tarp design has a rectangular shape. The leading edge is folded over creating a 2-ply thickness known as the hem. Seat belt style webbing is installed to the top side of this hem boosting its tear strength by 800 LBS. The passenger side of the tarp is folded over to create a pocket large enough for the 1" stationary pipe to slide through. The driver side pocket is large enough to hold a 2" pipe and is reinforced using 18" strips of webbing. We use a heavy duty 277 polyester bonded thread sewn in a double lock stitch that has been tested to outperform welded pockets.

Details

  • RT7.5
  • RT7.5
  • Lookout Mountain Tarp
  • Made to Order - Ships in 5 business days
  • New

Shipping Information

  • Item Requires Shipping
  • Free Ground Shipping Lower 48 States